Laying Laminate

July 12th, 2019 by Rosemary
Comments Off on Laying Laminate

Laying laminate by bonding plates Some parquet and laminate are joined together by means of grooves, scallops and glue. Recommended by the manufacturer of a continuous layer of adhesive is applied to the entire surface of the sidewalls and at the ends of the boards. Ways of applying the adhesive may be several, depending on the type of coverage. Glue is applied to the upper groove wood flooring planks or the groove laminate, which consists of chipboard. If parquet made of hardboard, glue is applied to the comb or on the upper side of the groove.

Usually use vinyl glue. Boards have as in other types of packing. The first plate is placed groove to the wall. The following boards combined with Combs has already put plates. Rotational movement forward and simultaneously push the left join boards. Then tapped with a hammer through the impact plate to secure the connection. Excess adhesive in the seam is removed with a spatula, then seal with a damp sponge and dry with a cloth. Clay should not be too much. At the time of the adjournment of the boards of tightening the clamp or strap. Parquet floor must dry for 12 hours, but thereafter it can be walk.

Posted in General

Comments are closed.